Tables

Your Tables Plus table with regular care and maintenance will provide many years of excellent service. To maintain the quality finish please follow the cleaning and maintenance instructions set out below.

These instructions are provided as a recommendation without warranty, as the conditions and results may vary.

Wood Finishes

  1. Regular dusting with a soft cloth or a light feather duster will avoid a build-up of grime, which will dull the surface finish.
  2. Occasionally gently buff the surface in the direction of the wood grain with a soft lint free cloth and a light application of non-silicone polish such as Mirotone Spray Glow.
  3. All spillages should be removed immediately. Water or any moisture should never be allowed to remain on a wood surface
  4. Do not place tables in a position of exposure to direct sunlight, near radiators, air conditioning vents, humidifiers or a fireplace.
  5. Under no circumstances should an abrasive cleaner be used
  6. To protect the wood finish use insulated place mats or coasters under cold, hot or damp objects
  7. Use protective leather or felt pads under all writing areas and business machines
  8. Avoid direct alcohol or beverage contact with the surface. Glasses or bottles left directly on the table may cause permanent damage to the surface
  9. Placemats or anything left permanently on the surface will leave a darker shadow, as natural and electrical lighting tend to lighten exposed timber over a period of time.
  10. To prevent scratching to the wood surface avoid placing the following on the tabletop
    Metal suspension files & binders
    Items with metal, rubber or hard plastic edge caps or feet

Plastic Laminates

  1. Regular dusting with a soft cloth or a light feather duster will avoid a build-up of grime, which will dull the surface finish.
  2. For general cleaning wash the laminate with a soft cloth in a mixture of warm water and diluted mild detergent. For heavier removal of food oils or finger marks use a mixture of warm water and diluted mild detergent with a soft bristle brush using a light circular motion. Rinse thoroughly and dry by gently buffing with a soft lint free cloth in the direction of the grain. In the absence of a grain gently buff in a circular motion.
  3. When cleaning surfaces with water care should be taken to not allow the water to pool on a laminate or wood edge as this may degrade the bond and cause swelling.
  4. Under no circumstances should steel wool, hot water, solvent or an abrasive cleaner be used. Use of polishes or sealers is not recommended, as these will over a period of time cause a residue buildup

Glass

  1. Regularly dust with a soft cloth or a light feather duster.
  2. Clean with a recognised glass cleaner while following the manufacturers instructions.
  3. Where the glass is inlaid ensure the cleaner does not migrate to surrounding wood or metal surfaces
  4. Frosted glass is susceptible to finger grease residue when touched. To clean use a recognised glass cleaner over the whole surface, which may need to wiped several time to remove dirt /grease out of the pores.

Marble

  1. Marble should be washed often with clear lukewarm water and gently buffed dry with a soft cloth.

Polished Aluminium

  1. For routine cleaning apply a soft wax paste (such as NXt Generation Metal Polysh) while following the manufacturers instructions. In humid conditions or near salt water apply the the wax once a month

Powdercoated Metal

  1. For normal cleaning wash surfaces with a soft cloth in mild detergent and lukewarm water. Rinse throughly and gently buff dry with soft lint free cloth.
  2. Scuff marks may be removed with an automotive soft paste wax or liquid while following the manufacturers instructions

Stainless Steel

For routine cleaning, wash surfaces with a soft cloth in mild detergent or soap and lukewarm water. Sponge, rinse with clear water and gently wipe dry in the direction of the polish grain with a soft lint free cloth.

For further information contact. sales@robinsoncorp.com.au